Digital Input Split

With a Stagebox

WARNING

Doing a digital split with a stagebox requires that the monitor console has a second SLink port be installed using the SLink I/O Card

On the monitor Console:

1. Press the I/O Button
2. Select Inputs on the left side
3. Select Input Channels sub menu on the left side
4. Select SLink on the top menu
5. Setup your patching for your input channels
6. Select Tie Lines
7. Select SLink on the left side
8. Select I/O Port on the top menu
9. Map up to the first 64 channels "1-to-1"

On the FOH Console:

1. Press the I/O Button
2. Select Inputs on the left side
3. Select Input Channels sub menu on the left side
4. Select SLink on the top menu
5. Setup your patching for your input channels

INFO

FOH will only have trim for gain control while Monitors will need to make sure to set gain correctly.

Without a Stagebox

On the monitor Console:

1. Press the I/O Button
2. Select Inputs on the left side
3. Select Input Channels sub menu on the left side
4. Select Local on the top menu
5. Setup your patching for your input channels
6. Select Tie Lines
7. Select Local on the left side
8. Select I/O Port on the top menu
9. Map up to the first 64 channels "1-to-1"

On the FOH Console:

1. Press the I/O Button
2. Select Inputs on the left side
3. Select Input Channels sub menu on the left side
4. Select SLink on the top menu
5. Setup your patching for your input channels